The special design of the control knob system guarantees against water infiltration.
Safety valve avoids overpressure of the steam in the jacket.
Right angled side edges eliminate gaps and possible dirt traps between units.
Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).
Energy regulation through a control knob.
Continuous water filling regulated through a manual water tap.
Safety thermostat to avoid operation without water.
Water basins in 316 type Stainless steel.
Large drain with manual ball-valve for fast emptying of well.
Solenoid valve to refill with hot and cold water.
Safety thermostat protects against low water level.
Sides of vessel with satin finishing for easy cleaning.
Water basins are seamlessly welded into the top of the appliance.
Round kettle is suitable to cook, sauté or poach all kinds of produce.
No overshooting of cooking temperatures, fast reaction.
Manometer allows to correctly control the functioning of the pan.
Large capacity food tap enables safe and effortless discharging of contents.
Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110° C in the jacket.
Pressed cooking vessel and lid in 316 AISI Stainless steel.
External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.
Appliance is IPX5 water resistance certified.
Heavy duty internal frame in Stainless steel.
Discharge tube and tap are very easy to clean from outside.
All major compartments located in front of unit for ease of maintenance.
Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
Easy-to-use control panel.
Minimum load for correct funtioning is 20 liters.
AISI 304 stainless steel worktop, 2mm thick.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Stainless steel top provides a heavy duty work surface under any load.
Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion.
IPx4 water protection.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.