Electrolux Professional
Water Treatment External Reverse Osmosis Filter (COD 864388)
Where to buy
Water TreatmentExternal Reverse Osmosis Filter
Installation Solutions - Water Treatment

Water Treatment
External Reverse Osmosis Filter

COD 864388

External reverse osmosis filter for single tank Dishwashers with atmosphere boiler and Ovens

Where to buy
Register your product

Specifications

  • Supply voltage: 220-240 V/1N ph/50/60 Hz

    Total Watts: 0.18 kW

  • Inlet water supply pressure: 1-4 bar

    Water supply temperature:

    Inlet water supply hardness (MAX): 44°fH / 25°dH

    Inlet water supply conductivity (MAX): 1200 µS/cm

    Incoming water line size: 3/4"

    Osmotised water recovery: 25 / 60 %

    Water flow rate at 15°C: 2 l/min

    Salt and mineral retention rate: 95 %

    Upstream water softener recommended if water supply hardness °fH, °dH > 44 / 25 °fH/°dH

    Upstream water softener recommended if water chlorinated concentration > 0.5 mg/l

  • External dimensions, Width: 143 mm

    External dimensions, Depth: 483 mm

    External dimensions, Height: 455 mm

    Net weight: 20 kg

    Packaging size(WxDxH): 400x800x680 mm

Product Features

The reverse osmosis filter treats the water before it enters the equipment. The filter is able to remove approximately 99% of minerals in the water.
The unit is a multi-step physical filter: a built-in prefiltering device (sediment filter and an active carbon filter) eliminates particles, chlorine and possible odors from the water; the final filtering level uses the "reverse osmosis" principle pushing high-pressure water through a semi-permeable membrane to remove more than 95% of salt and impurities.
Flow rate of 120l/h at 15°C.
The unit has compact dimension and can be installed in horizontal or vertical position (with the cover oriented upwards) next to the machine.
Optional accessory of four small casters facilitates cleaning and movement.
Equipped with manual by-pass that allows, in case of malfunctions, to exclude the osmosis filter system for continuous function of the machine.
Impurities and bacteria retained by the membrane are eliminated by self-cleaning system. Automatic membrane flushing occurs every 6 hours but it's possible to start the flushing manually.
Electronic control with clear display shows not only Reverse osmosis filter data i.e. the residual conductivity value, the residual filter autonomy and operation hours but also alarm signals as lacks of pressure from network, filter exhaustion and water leakage.
When used with hard water (feeding water hardness > 25°dH/44°fH or conductivity > 1200μS/cm), a water softener is recommended to reduc membrane damage and the need for descaling.
Reverse osmosis filter requires cold water (min 5°C, max 35°C) and feeding water pressure between 1-4 bar.

Included Accessories

Image
Quantity
Code
Description
Quantity: 1
Code: 864393
External carbon filter for reverse osmosis

Complete the form below to request more information

Explore our
Service Network

Discover more

Where to
buy this product

Discover more

Download user
manuals

Discover more

Register your
products

Discover more

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×