Electrolux Professional
Warewashing Flight type dishwasher, 1 tank, 5200 dishes/h, electric, 750mm loading, 1000mm unloading, 1dryer,ESD (COD 520040)
Where to buy
WarewashingFlight type dishwasher, 1 tank, 5200 dishes/h, electric, 750mm loading, 1000mm unloading, 1dryer,ESD
1 Tank

Warewashing
Flight type dishwasher, 1 tank, 5200 dishes/h, electric, 750mm loading, 1000mm unloading, 1dryer,ESD

COD 520040

Flight Type Dishwasher, 1 tank, 5200 dishes/h, electric, 750mm loading, 1000mm unloading, 1 dryer, 55mm conveyor, ESD, right to left

Where to buy
Register your product

Specifications

  • Supply voltage: 380-415 V/3N ph/60 Hz

    Default Installed Power: 42.7 kW

    Wash tank heating elements: 16 kW

    Boiler heating elements: 14 kW

    Dryer install power: 9.75 kW

    Rinse pump size: 0.25 kW

    Wash pump size: 2 kW

  • Inlet water line size: ISO 3/4" G

    Drain line size: 2"

    Inlet water supply pressure: 1-6 bar

    The higher the temperature, the faster the warm-up time. Recommended temperature of 50°C.

    Inlet water supply temperature (boiler): 10 min / 30 max °C

    Inlet water supply temperature (tanks): 10 min / 60 max °C

    Flow rate of wash pump: 560 l/m

    Inlet water supply hardness (min/max): 14 / 8 °fH/°dH

    Wash tank size: 98 l

    Duo rinse tank size: 8 l

  • Final rinse temperature: 82-90 °C

    Duo rinse temperature: 82-90 °C

    1st wash temperature: 55-65 °C

    Productivity per hour (max speed): 5200dishes/3477trays/193Basket

    Productivity per hour (slow speed): 3240dishes/2160trays/120Basket

    Conveyor speed (min/max): 1 / 1.6

    Drying temperature: 50-70 °C

    Drying fan capacity: 3500 m³/h

    External dimensions, Width: 4150 mm

    External dimensions, Depth: 946 mm

    External dimensions, Height: 1983 mm

    Height with door open: 2092 mm

    Charging hole size (width): 612 mm

    Charging hole size (height): 412 mm

    Net weight: 925 kg

  • Rinse water consumption at max. speed: 210 l/h

  • Air Flow: 500 m³/h

    Air temperature: 30 °C

    Air humidity: 100%

    The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 14°C inlet water temperature and refer only to the machine.

Product Features

The water in the main wash tanks circulating at a temperature of 55-65°C is pumped with detergent and is sprayed over the items from both the upper and the lower wash arms, guaranteeing a uniform distribution of the washing solution and allowing all the areas of the washing chambers to be covered.
Rinse area equipped with the DUO-rinse system: the first rinse arms with side nozzles are filled with re-circulated rinsed water then spray at powerful pressure in a curtain pattern to eliminate majority trace of detergent, while the second arms are filled with hot clean water at temperature of 82-90°C to guarantee the hygiene performance on the washed wares.
Built-in pre-adjustable pressure valve before the boiler stabilizes incoming water pressure to ensure the proper rinsing pressure for optimum hygiene.
A drying section with inspection door (800 mm length) is equipped as an integral part of the machine. This allows the operator to remove practically dried items immediately, without them being too hot to handle.
Simple service from the front.
Maximum capacity per hour of 5.200 dishes.
Two conveyor speeds can be selected through the control panel by the operator.
The multi-purpose conveyor belt with 55mm finger distance allows to load the tablewares either directly on the conveyor or using standard 500x500mm racks.
The large loading section of 750mm facilitates the loading of tablewares.
The unloading section of 1.000mm with an end limit switch mounted at the end stops the conveyor automatically to avoid damaging clean items if not removed on time.
The machine incorporates a safety switch for stop in urgency at both loading and unloading sections which will stop the conveyor by pushing the button in case that washed wares have not been removed after cleaning.
Flat panel with simple to use control and all temperature displays.
Adjustable feet for full access underneath the machine for cleaning.
All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side, back panels and internal chamber, wash and arms, tank filters, doors.
Deep drawn pressed tanks with fully round corners to prevent dirt build up provides fast drainage. Pressed tanks with no welded points offer a guaranteed water tight solution.
No leg in loading area.
Double tank filters (flat and small strainer) cover the entire width of the tank.
Wash/rinse arms and filters are easy to remove for cleaning.
Drain line is fully enclosed with anti-corrosive 304 type stainless steel panels for easy and safe floor cleaning as well as avoid damaging the pipe during transportation.

Complete the form below to request more information

Explore our
Service Network

Discover more

Where to
buy this product

Discover more

Download user
manuals

Discover more

Register your
products

Discover more

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×