Electrolux Professional
Modular Cooking Range Line 700XP 4 Hot Plate Electric Induction Cooking Top Range (COD 371132)
Where to buy
Modular Cooking Range Line700XP 4 Hot Plate Electric Induction Cooking Top Range
Induction Cooking Tops

Modular Cooking Range Line
700XP 4 Hot Plate Electric Induction Cooking Top Range

COD 371132

4-zone (3,5 kW each) electric Induction Cooking Top

Suggested green version.

Where to buy
Register your product

Specifications

  • Supply voltage: 230 V/3 ph/50/60 Hz

    Total Watts: 14 kW

    Predisposed for:

  • Induction Top Dimensions (width): 800 mm

    Induction Top Dimensions (depth): 730 mm

    External dimensions, Width: 800 mm

    External dimensions, Depth: 730 mm

    External dimensions, Height: 250 mm

    Net weight: 57 kg

    Shipping weight: 67 kg

    Shipping height: 520 mm

    Shipping width: 820 mm

    Shipping depth: 860 mm

    Shipping volume: 0.37 m³

    If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.

    Induction compatible pots & pans must be used.

    Certification group: NIN87F

Product Features

Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
Suitable for countertop installation.
6mm glass ceramic cooking surface with 4 independently controlled induction zones with a power of 3.5 kW per zone.
Almost the entire surface of the ceramic plate can be used without “dead” spots.
Indicating lamp for each zone located on control console.
Induction plates endowed with overheating safety device.
Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
Low heat dissipation to the kitchen.
The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
IPx4 water protection.
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Explore our
Service Network

Discover more

Where to
buy this product

Discover more

Download user
manuals

Discover more

Register your
products

Discover more

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×