Electrolux Professional New Zealand and Pacific Islands
Cold Rooms 203x243 -2+8°C Built-in Unit (COD 102044)
Where to buy
Cold Rooms203x243 -2+8°C Built-in Unit
Cold Rooms203x243 -2+8°C Built-in Unit
Built-In Refrigerating Unit - Temp. -2/+8°C

Cold Rooms
203x243 -2+8°C Built-in Unit

COD 102044

Cold Room 2030x2430 th.60mm, included Unit

Where to buy

Specifications

  • Supply voltage: 220 V/1N ph/50 Hz

    Electrical power max.: 1.33 kW

    Total Watts: 1.33 kW

  • Current consumption: 3.97 Amps

    Refrigerant type: R290

    Refrigerant weight: 140 g

  • External dimensions, Width: 2150 mm

    External dimensions, Depth: 2550 mm

    External dimensions, Height: 2150 mm

    Internal Dimensions, Width: 2030 mm

    Internal Dimensions, Depth: 2430 mm

    Internal Dimensions, Height: 2030 mm

    Net weight: 457 kg

  • Connection type: Cable-RS485

    Protocol type: Carel;Modbus

Product Features

Very short assembly time. Expert refrigeration knowledge is not required for installation.
Anti-slip walk-in floor.
High hygiene standards and easy to clean thanks to rounded internal / external corners and radiused edges.
Fast-fit centering system allows perfect alignment of the panels. These new fasteners are made of high resistant composite materials and guarantee perfect grip/sealing of all components.
Floor surface on which the cold room will be placed should be levelled if presenting irregularities or unevenness up to 1 cm.
New vacuum injection foaming allows significant and enhanced insulation and higher quality.
Airtight panels connection, all sides of panels have PVC gasket foamed in place to assure airtight and secure fitting; any other sealing between panels on site is eliminated.
Semi recessed door saving space on the external side.
Newly designed handle complete with lock and interior safety release to prevent entrapment when the door is accidentally locked from outside.
Defrosting through heated gas with re-evaporation of defrosting water permits to reduce the total power installed, shorten defrosting time and limit the warming of the cold room. Dedicated drain hole is not needed.
Temperature controller with touch panel.
Control panel includes: luminous ON/OFF switch, internal light switch, cold room functioning indicator, defrost cycle indicator, temperature and thermostat control with digital display.
The unit is ready to be connected with OnE Connectivity for 24/7 real time monitoring, increasing equipment uptime, maximum profit and optimizing your process.
Conform to ruling European safety and hygiene standards and CE marked.
Panels are cladded inside and outside with anti-scratch galvanized plastified steel with 120 micron nontoxic pvc coating, polyurethane foam insulation, CFC and HCFC free.
Whenever the cold room door is opened the microswitch switches on automatically the internal light and turns off the cooling fan.

Complete the form below to request more information

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×