Electrolux Professional New Zealand and Pacific Islands
Warewashing Medium pre-wash zone for green&clean multi-rinse Rack Type with Energy Saving Device, ZERO LIME (COD 535036)
Where to buy
WarewashingMedium pre-wash zone for green&clean multi-rinse Rack Type with Energy Saving Device, ZERO LIME
Multi Rinse Rack Type dishwashers - Pre-washing modules - medium

Warewashing
Medium pre-wash zone for green&clean multi-rinse Rack Type with Energy Saving Device, ZERO LIME

COD 535036

Medium pre-wash zone for green&clean Multi Rinse Rack Type Dishwasher with Energy Saving Device, ZERO LIME Device, WRAS/Watermark approval

Where to buy

Specifications

  • Pre-wash tank heating elements are activated only during sanitation cycle.

    Supply voltage: 380-415 V/3N ph/50 Hz

    Pre-wash tank heating elements: 7 kW

    Default Installed Power: 7.37 kW

    Pre-wash pump size: 0.37 kW

  • For transportation purpose only, the depth can be reduced to 795mm by removing the door handle.

    Reference norm used to measure the noise: IEC60335-2-58 annex AA.

    External dimensions, Width: 560 mm

    External dimensions, Depth: 825 mm

    External dimensions, Height: 1785 mm

    Height with door open: 2095 mm

    Charging hole size (width): 530 mm

    Charging hole size (height): 490 mm

    Net weight: 110 kg

    Shipping weight: 127 kg

    Shipping height: 2030 mm

    Shipping width: 700 mm

    Shipping depth: 910 mm

    Shipping volume: 1.29 m³

    Pre-wash temperature: 10 - 40 °C

  • Noise level: <62 dBA

  • Pre-wash tank size:

Product Features

Adjustable feet for full access underneath the machine for cleaning.
Automatic drain, clean and sanitize cycles featured as standard. The internal chamber, including the internal door is completely cleaned or sanitized avoiding bacteria proliferation for maximum hygiene and reducing manual work/time for operator.
Pre-wash section uses cold water so food remains are not "baked" onto the plates in order to have better pre-wash performance.
The feeding direction can be either left to right or right to left as it's reversible on site.
Built-in drain valve in the tanks allows automatic dump and fill to refresh the water in the tank without any interruption of the washing process.
Manual process of pre-wash spraying replaced by automatic prewash module before the main wash section.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Deep drawn pressed tank with fully rounded corners, sloped towards the drain to prevent dirt build-up, provides fast drainage in just a few minutes. With no welding points the pressed tank offers a guaranteed water tight solution.
Large counter balanced inspection door allows unrestricted all-round access to the internal area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
All main components made in heavy duty anti-corrosive 304 type stainless steel: internal chamber, external, front and side panels, pre-wash arms and rack transportation system.

Complete the form below to request more information

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×