Prearranged to fit RS485 port to facilitate connection to a remote computer and integrated HACCP systems.
Connectivity ready for real time access to connected appliances from remote and data monitoring (requires optional accessory).
Certified safety CE requirements.
External back panel in galvanized steel.
External bottom panel in stainless steel.
Frontal and easy access to all components in the cooling unit.
Fully removable cooling unit to facilitate maintenance.
Combination of doors and drawers to suit any configuration need, with the possibility to change the configuration on site. Right cooling unit available on request.
Preservation performances and temperature uniformity within the cell guaranteed at 5-HEAVY DUTY (40°C) working conditions according to EN16825:2016 test protocol.
Hot gas automatic evaporation of defrost water.
0mm clearance installation space: tower configuration cooling unit guarantee performance with frontal ventilation only; this unique solution allows installation against the wall or side by side with other appliances, even on the cooling unit side to maximize the use of kitchen space.
Adjustable temperature range from -2 °C to +10 °C to suit meat, fish and dairy storage requirements.
Fully compliant HACCP digital control: when temperature exceeds critical limits, acoustic and visual alarms are activated. Up to two months of event are kept in memory.
Raised rear upstand permits unit to be connected up against the wall for better hygiene.
Anti-tilt runners accept GN 1/1 containers.
Large digital white-digit display with humidity selection button (3 preset level), internal temperature display and setting, manual activation of defrost cycle and turbo frost cycle (to rapidly cool warm loads).
Self closing stainless steel doors (< 90°).
Internal structure with numerous charging positions available to host grids, ensuring higher net capacity and a greater storage space.
If needed, working top can be removed for easier handling during installation (in case of narrow doors).
Built-in refrigeration unit.
2 compartments with 2 doors.
Worktop in AISI 304 Stainless steel with a 50 mm profile.
Anti-drip profile on stainless steel worktop edge.
Internal and external doors, front and side panels and removable worktop in AISI 304 Stainless steel.
Interior base with rounded corners, pressed from a single sheet.
Fault code display.
Developed and produced in ISO 9001 and ISO 14001 certified factory.
Built-in compressor to suit operating conditions.
Ease of cleaning and high hygiene standards thanks to the rounded internal corners, the easily removable runners, grids and air conveyors.
Internal structure with 15 charging positions (3 cm pitch) available to host GN 1/1 grids, ensuring higher net capacity and a greater storage space.
