Commercial washing machines are vital to the operations of many businesses, from
laundromats to hotels and hospitals. While these machines are built to handle heavy
loads and frequent use, they can occasionally run into problems. Understanding how
to troubleshoot common issues can save you time and money, reducing downtime
and maintaining efficiency. For additional support and maintenance tips, visit
Electrolux Professional.
1. Machine Not Starting
Problem Diagnosis:
● Power supply interruptions
● Faulty door lock mechanism
● Overloading of the machine
Troubleshooting Steps:
● Ensure that the machine is properly plugged in and that the outlet is
functional.
● Inspect the door lock for any damage or malfunction. A door that does not
lock properly can prevent the machine from starting as a safety precaution.
● Check if the machine is overloaded. Removing some items can help reset the
system and allow the machine to start.
2. Inadequate Cleaning Results
Problem Diagnosis:
● Overloading the machine
● Using incorrect detergent amounts or types
● Setting the machine on inappropriate wash cycles
Troubleshooting Steps:
● Adhere to the manufacturer’s recommended load capacity to ensure clothes
move freely and are effectively cleaned.
● Use the type and amount of detergent recommended for commercial
machines. Incorrect detergent can lead to poor cleaning results.
● Select the correct washing cycle based on the fabric type and soil level to
optimise cleaning.
3. Excessive Vibration or Noise
Problem Diagnosis:
● Load imbalance
● The machine is not level
● Wear and tear on mechanical parts like bearings or belts
Troubleshooting Steps:
● Redistribute the washing load evenly to reduce imbalance.
● Adjust the levelling feet at the base of the machine to ensure it stands flat and
stable on the floor.
● Examine and replace any worn-out parts such as bearings or belts that can
cause abnormal noises or vibrations.
4. Water Not Filling or Draining Properly
Problem Diagnosis:
● Blocked water inlet hose
● Malfunctioning drain pump
● Clogged drain
Troubleshooting Steps:
● Inspect and clean the water inlet filters to remove any blockages that prevent
water from filling the machine.
● Check the drain pump and connecting hoses for blockages or defects that
might hinder water drainage.
● Ensure that the drain system is not obstructed, allowing water to flow freely.
5. Unexpected Stops During Cycle
Problem Diagnosis:
● Motor overheating
● Faulty sensors
● Issues with the control board
Troubleshooting Steps:
● If the motor is overheating, allow the machine to rest before restarting the
cycle.
● Clean or replace any sensors that are not functioning correctly to ensure
accurate operations.
● If suspected, have a professional examine and possibly repair or replace the
control board.
Conclusion
Encountering operational issues with commercial washing machines can be
frustrating, but many common problems can be resolved with basic troubleshooting.
Consistent maintenance and understanding your machine’s functionalities are
crucial for prolonged efficiency and reliability.
For expert maintenance services and more troubleshooting tips, please visit
Electrolux Professional.