Modular Cooking Range Line 900XP Gas Cylindrical Boiling Pan 60lt indirect heat (60Hz) (COD 391234)
Gas Cylindrical Boiling Pans

Modular Cooking Range Line
900XP Gas Cylindrical Boiling Pan 60lt indirect heat (60Hz)

COD 391234

40/60-lt gas Boiling Pan, indirect heating

Specifikationer

  • Supply voltage: 230 V/1N ph/60 Hz

    Total Watts: 0.1 kW

  • Gas Power: 14 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG;Natural Gas

    Gas Inlet: 1/2"

  • Net weight: 115 kg

    Shipping weight: 140 kg

    Shipping height: 1180 mm

    Shipping width: 880 mm

    Shipping depth: 1140 mm

    Shipping volume: 1.18 m³

    No clearance needed on rear sides of unit if wall is of non combustible type. If wall is combustible, minimum 50 mm wall clearance should be maintained.

    Certification group: N9PIG

Produktegenskaber

Pressed cooking vessel and lid in 316 AISI Stainless steel.
Smooth large surfaces, easy access for cleaning.
Safety valve avoids overpressure of the steam in the jacket.
Energy regulation through a control knob.
The special design of the control knob system guarantees against water infiltration.
Round kettle is suitable to cook, sauté or poach all kinds of produce.
Solenoid valve to refill with hot and cold water.
Safety thermostat protects against low water level.
No overshooting of cooking temperatures, fast reaction.
Manometer allows to correctly control the functioning of the pan.
Large capacity food tap enables safe and effortless discharging of contents.
Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
Appliance is IPX5 water resistance certified.
Discharge tube and tap are very easy to clean from outside.
Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110° C in the jacket.
External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.
Sides of vessel with satin finishing for easy cleaning.
Minimum load for correct funtioning is 20 liters.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion.
All exterior panels in Stainless Steel with Scotch Brite finishing.

Included Accessories

Image
Quantity
Code
Description
Quantity: 1
Code: 927222
Water additive against corrosion for indirect boiling pans

Complete the form below to request more information

Select your country

 
Din webbrowser er forældet!

Opdater din webbrowser for at se siden korret. Opdater min webbrowser nu

×