Modular Cooking Range Line 900XP Gas Cylindrical Boiling Pan 60lt indirect heat (COD 391232)
Gas Cylindrical Boiling Pans

Modular Cooking Range Line
900XP Gas Cylindrical Boiling Pan 60lt indirect heat

COD 391232

60-lt gas Boiling Pan, indirect heating

Specifikationer

  • Supply voltage: 230 V/1N ph/50 Hz

    Total Watts: 0.1 kW

  • Gas Power: 14 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG;Natural Gas

    Gas Inlet: 1/2"

  • Net weight: 115 kg

    Shipping weight: 116 kg

    Shipping height: 1180 mm

    Shipping width: 880 mm

    Shipping depth: 1140 mm

    Shipping volume: 1.18 m³

    No clearance needed on rear sides of unit if wall is of non combustible type. If wall is combustible, minimum 50 mm wall clearance should be maintained.

    Certification group: N9PIG

Produktegenskaber

Appliance is IPX5 water resistance certified.
Sides of vessel with satin finishing for easy cleaning.
Energy regulation through a control knob.
Large drain with manual ball-valve for fast emptying of well.
Continuous water filling regulated through a manual water tap.
Safety thermostat to avoid operation without water.
Water basins in 316 type Stainless steel.
Water basins are seamlessly welded into the top of the appliance.
Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).
The special design of the control knob system guarantees against water infiltration.
Solenoid valve to refill with hot and cold water.
Safety valve avoids overpressure of the steam in the jacket.
Safety thermostat protects against low water level.
Round kettle is suitable to cook, sauté or poach all kinds of produce.
Right angled side edges eliminate gaps and possible dirt traps between units.
All major compartments located in front of unit for ease of maintenance.
Discharge tube and tap are very easy to clean from outside.
Easy-to-use control panel.
Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.
Heavy duty internal frame in Stainless steel.
Pressed cooking vessel and lid in 316 AISI Stainless steel.
Large capacity food tap enables safe and effortless discharging of contents.
Manometer allows to correctly control the functioning of the pan.
No overshooting of cooking temperatures, fast reaction.
Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110° C in the jacket.
Minimum load for correct funtioning is 20 liters.
IPx4 water protection.
Stainless steel top provides a heavy duty work surface under any load.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
AISI 304 stainless steel worktop, 2mm thick.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion.

Included Accessories

Image
Quantity
Code
Description
Quantity: 1
Code: 927222
Water additive against corrosion for indirect boiling pans

Complete the form below to request more information

Select your country

 
Din webbrowser er forældet!

Opdater din webbrowser for at se siden korret. Opdater min webbrowser nu

×