Modular Cooking Range Line 900XP Gas Cylindrical Boiling Pan 150lt direct heat - autoclave (COD 391108)
Gas Cylindrical Boiling Pans

Modular Cooking Range Line
900XP Gas Cylindrical Boiling Pan 150lt direct heat - autoclave

COD 391108

150-lt gas Boiling Pan with, direct heating, autoclave

Specifikationer

  • Supply voltage: 220-230 V/1 ph/50 Hz

    Total Watts: 0.1 kW

  • Gas Power: 24 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG;Natural Gas

    Gas Inlet: 1/2"

  • Pan useful capacity: 143 lt

    Vessel (round) diameter: 600 mm

    Net weight: 145 kg

    Shipping weight: 170 kg

    Shipping height: 1180 mm

    Shipping width: 880 mm

    Shipping depth: 1140 mm

    Shipping volume: 1.18 m³

    No clearance needed on rear sides of unit if wall is of non combustible type. If wall is combustible, minimum 50 mm wall clearance should be maintained.

    Certification group: N9PDG

Produktegenskaber

Autoclave lid with air insulation in the jacket, watertight rubber gasket, safety valave and sturdy stainless steel handle, to allow cooking with a slight overpressure (0,05 bar).
Round kettle is suitable to cook, sauté or poach all kinds of produce.
Produce is uniformly heated in the base and side walls of the kettle by a direct heating system.
Appliance is IPX5 water resistance certified.
Energy regulation through a control knob.
No overshooting of cooking temperatures, fast reaction.
Large capacity food tap enables safe and effortless discharging of contents.
Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
Discharge tube and tap are very easy to clean from outside.
Solenoid valve to refill with hot and cold water.
Smooth large surfaces, easy access for cleaning.
The special design of the control knob system guarantees against water infiltration.
Pressed cooking vessel in 316L AISI Stainless steel.
Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Select your country

 
Din webbrowser er forældet!

Opdater din webbrowser for at se siden korret. Opdater min webbrowser nu

×