Modular Cooking Range Line 700XP 6-Burner Gas Boiling Top (COD 371004)
Gas Boiling Tops

Modular Cooking Range Line
700XP 6-Burner Gas Boiling Top

COD 371004

6-Burner (5,5 kW each) gas Boiling Top

Specifikationer

  • Gas Power: 33 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG;Town

    Gas Inlet: 1/2"

  • Front Burners Power: 5.5 - 5.5 kW

    Back Burners Power: 5.5 - 5.5 kW

    Middle Burners Power: 5.5 - 0/5.5 - 0 kW

    Back Burners Dimension - mm Ø 60 Ø 60

    Front Burners Dimension - mm Ø 60 Ø 60

    Middle Burners Dimension - mm Ø 60 Ø 60

    External dimensions, Width: 1200 mm

    External dimensions, Depth: 730 mm

    External dimensions, Height: 250 mm

    Net weight: 55 kg

    Shipping weight: 68 kg

    Shipping height: 540 mm

    Shipping width: 820 mm

    Shipping depth: 1260 mm

    Shipping volume: 0.56 m³

    If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.

    Certification group: N7CG

Produktegenskaber

Control knobs provide smooth, continuous rotation from min to max power level.
Suitable for countertop installation.
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
The six 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Pan supports in cast iron are washable in a dishwasher.
Burners to feature flame regulator.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
IPx4 water protection.
All exterior panels in Stainless Steel with Scotch Brite finishing.
One piece pressed 1.5 mm work top in Stainless steel.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Complete the form below to request more information

Select your country

 
Din webbrowser er forældet!

Opdater din webbrowser for at se siden korret. Opdater min webbrowser nu

×