Modular Cooking Range Line 700XP Freestanding Gas Boiling Pan 60lt indirect heat with auto refill (COD 371270)
Gas Boiling Pans

Modular Cooking Range Line
700XP Freestanding Gas Boiling Pan 60lt indirect heat with auto refill

COD 371270

60-lt indirect gas Boiling Pan with pressure switch with automatic double-jacket refilling

Specifikationer

  • Supply voltage: 230 V/1N ph/50 Hz

    Total Watts: 0.1 kW

  • Gas Power: 14 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG

    Gas Inlet: 1/2"

  • Water drain outlet size: 1"1/2

  • Pan useful capacity: 60 lt

    Vessel (round) diameter: 420 mm

    Net weight: 100 kg

    Shipping weight: 102 kg

    Shipping height: 1140 mm

    Shipping width: 900 mm

    Shipping depth: 920 mm

    Shipping volume: 0.94 m³

    No clearance needed on rear sides of unit if wall is of non combustible type. If wall is combustible, minimum 50 mm wall clearance should be maintained.

    Certification group: N7PG

Produktegenskaber

Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
Model features automatic water refilling of the double jacket when water reaches the minimum level.
Unit to have stainless steel feet with height adjustment up to 50 mm.
Solenoid valve to refill with hot and cold water.
Smooth large surfaces, easy access for cleaning.
Safety valve avoids overpressure of the steam in the jacket.
Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110° C in the jacket.
No overshooting of cooking temperatures, fast reaction.
Large capacity food tap enables safe and effortless discharging of contents.
Kettle is suitable to cook, sauté or poach all kinds of produce.
External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.
Discharge tube and tap are very easy to clean from outside.
Sides of vessel with satin finishing for easy cleaning.
Minimum load for correct funtioning is 20 liters.
One piece pressed 1.5 mm work top in Stainless steel.
Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion.
IPx4 water protection.
The tanks are welded in two parts, the side band is in AISI 304, bottom is in ASI 316L, lids are in AISI 304.

Complete the form below to request more information

Select your country

 
Din webbrowser er forældet!

Opdater din webbrowser for at se siden korret. Opdater min webbrowser nu

×