Modular Cooking Range Line 700XP Freestanding Gas Boiling Pan 60lt indirect heat (COD 371269)
Gas Boiling Pans

Modular Cooking Range Line
700XP Freestanding Gas Boiling Pan 60lt indirect heat

COD 371269

60-lt indirect gas Boiling Pan with pressure switch

Specifikationer

  • Supply voltage: 230 V/1N ph/50 Hz

    Total Watts: 0.1 kW

  • Gas Power: 14 kW

    Standard gas delivery: Natural Gas G20 (20mbar)

    Gas Type Option: LPG

    Gas Inlet: 1/2"

  • Water drain outlet size: 1"1/2

  • Pan useful capacity: 60 lt

    Vessel (round) diameter: 420 mm

    Net weight: 100 kg

    Shipping weight: 100 kg

    Shipping height: 1140 mm

    Shipping width: 820 mm

    Shipping depth: 860 mm

    Shipping volume: 0.8 m³

    No clearance needed on rear sides of unit if wall is of non combustible type. If wall is combustible, minimum 50 mm wall clearance should be maintained.

    Certification group: N7PG

Produktegenskaber

No overshooting of cooking temperatures, fast reaction.
External valve allows to manually evacuate excess air accumulated in the jacket during heating phase.
Ergonomic: the depth of the vessel facilitates stirring the food, also the most delicate food.
Discharge tube and tap are very easy to clean from outside.
Produce is uniformly heated in the base and side walls of the kettle by an indirect heating system that uses integrally generated saturated steam at a temperature of 110° C in the jacket.
Large capacity food tap enables safe and effortless discharging of contents.
Kettle is suitable to cook, sauté or poach all kinds of produce.
Unit to have stainless steel feet with height adjustment up to 50 mm.
Solenoid valve to refill with hot and cold water.
Safety valve avoids overpressure of the steam in the jacket.
Smooth large surfaces, easy access for cleaning.
Sides of vessel with satin finishing for easy cleaning.
Minimum load for correct funtioning is 20 liters.
The tanks are welded in two parts, the side band is in AISI 304, bottom is in ASI 316L, lids are in AISI 304.
IPx4 water protection.
One piece pressed 1.5 mm work top in Stainless steel.
Robust burners in stainless steel with flame failure device, protected pilot light and optimized combustion.

Complete the form below to request more information

Select your country

 
Din webbrowser er forældet!

Opdater din webbrowser for at se siden korret. Opdater min webbrowser nu

×