Electrolux Professional Australia
Dishwashing Single rinse Rack Type dishwasher with Medium dryer, 100racks/hour, Electric, 50Hz (COD CC0ECC)
Where to buy
DishwashingSingle rinse Rack Type dishwasher with Medium dryer, 100racks/hour, Electric, 50Hz
Single Rinse Rack Type dishwashers - 100 racks per hour

Dishwashing
Single rinse Rack Type dishwasher with Medium dryer, 100racks/hour, Electric, 50Hz

COD CC0ECC

Single Rinse Rack Type Dishwasher with Medium Dryer, 100 racks/hour, electric, touch screen, insulated doors, customized direction on-site, 50Hz

Where to buy

Specifications

  • Supply voltage: 380-415 V/3N ph/50 Hz

    Default Installed Power: 29.6 kW

    Boiler heating elements: 12 kW

    Wash pump size: 1.18 kW

    Wash tank heating elements: 12 kW

  • Flow rate of wash pump: 400 l/min

    Inlet hot water line size:

    Inlet cold water line size: G 3/4"

    Drain line size: 50mm

    Inlet water supply pressure: 1.5-7 bar

    Inlet water supply temperature (wash and rinse): 50 - 65°C

    The higher the temperature, the faster the warm up. When there is ESD option installed, the machine should be connected to cold water up to 30°C.

    Inlet water supply hardness: 0-14 °fH / 0-8°dH

    Flow rate of wash pump: 400 l/h

    When below 7°fH/4°dH special detergent and rinse aid are needed.

    Peak rate of drain flow: 2.5 l/s

    Wash tank size: 70 l

  • Wash Temperature: 55 - 65 °C

    Productivity per hour (max speed): 100racks/1800dishes

    Dryer air flow: 540 m³/h

    Dryer air temperature: 70 °C

    Final rinse temperature: 85 °C

    Drying fan capacity: 540 m³/h

    External dimensions, Width: 1680 mm

    External dimensions, Depth: 920 mm

    For transportation purpose only, the depth can be reduced to either 890mm by removing the main switch button or 792mm by removing the control box and the door handle.

    Height with door open: 2095 mm

    Charging hole size (width): 530 mm

    Charging hole size (height): 490 mm

    For shipping data, please refer to price list.

    Reference norm used to measure the noise: IEC60335-2-58 annex AA.

    Table to table distance: 1680 mm

  • Rinse water consumption at max speed (l/rack): 1.5 lt/rack

    Rinse water consumption at max. speed (l/h): 150 l/h

  • Air flow: 107 m³/h

    Air temperature (top, exit): 45 °C

    Air humidity: 100 % r.h.

    The data is measured at exhaust points at 25°C and 60% r.h. ambient conditions, 18°C inlet water temperature and refer only to the machine.

    Latent heat: 8800 W

    Sensible heat: 7500 W

    This model requires a ventilation hood. Please refer to the attached "Recommended Exhaust Hood Design".

Product Features

Intuitive touch screen control panel features user-friendly display to easily operate the machine and to monitor machine status. Three different levels of interaction are available each show relevant messages and information to the operator, the general maintenance staff and the authorized service partners.
One conveyor speed can be selected through the control panel by the operator.
Maximum capacity per hour of 100 racks.
Large counter balanced inspection door allow unrestricted all-round access to the wash and rinse area. Door is insulated with injected foam. This adds strength as well as reduces noise and heat loss.
All internal components: wash and rinse arms, tank filters, curtains can be easily removed for cleaning.
Unit equipped with USB port making it simple to read data such as machine identification, counters and consumption, components, devices and alarm logs. Machine parameters can be uploaded and downloaded and firmware updated.
Adjustable feet for full access underneath the machine for cleaning.
IP25 protection against water jets, solid objects and small animals (larger than 6 mm).
Electronically controlled to optimize drying results.
Drying zone removes most of water from the crockery through a high powered fan that extracts dry air from outside mixing it with the internal air, thus providing dry plates at a temperature cool enough to handle safely.
The chamber is pressed with fully rounded corners without internal pipes and therefore no hidden dirt traps.
All electric components are put in one IP65 central box isolated from water and steam to ensure high reliability.
All main components made in heavy duty anti-corrosive 304 type stainless steel: external front, side panels and internal chambers, wash and rinse arms, doors and rack transportation system.
External pre-arrangement for inlet water, drain water, detergent & rinse aid connections for fast and easy installation on both sides of the unit.
Dishwasher structure is held together with a solid 50 x 50 mm stainless steel frame to provide long-term sturdiness.
Deep drawn pressed wash tank with fully rounded corners, sloped towards the drain to prevent dirt buildup, provides fast drainage in just a few minutes. With no welding points the pressed tank offers a guaranteed water tight solution.
The unit is built on modularity concept for easy to install on-site.
The feeding direction is right to left as pre-arrangement from the factory, but it can be simply reversed on-site to left to right.

Complete the form below to request more information

Select your country

 

Global

Global

Americas

North America

América Latina (Español)

Brasil

Middle East & Africa

Middle East & Africa (English)

Asia-Pacific

South East Asia and India (English)

Malaysia (English)

Australia

中国

日本

New Zealand and Pacific Islands

Europe

België

Belgique

Česká Republika & Slovenská Republika

Danmark

Deutschland

Österreich

Eesti

España

France

Ελληνικά

Hrvatska

Italia

Magyarország

Nederland

Norge

Polska

Schweiz

Suomi

Sverige

Türkiye

UK & Ireland

CIS

Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Ukraine, Uzbekistan (English)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×