Commercial tumble dryers are indispensable in ensuring your business runs
smoothly. However, like any frequently used appliance, they can encounter issues
that disrupt their operation. Understanding how to quickly diagnose and address
these common problems can save your business time and money. For further
assistance and expert advice, visit Electrolux Australia.
1. Dryer Not Starting
Symptoms:
● The dryer doesn’t respond when the start button is pressed.
Troubleshooting Steps:
● Check Power Supply: Ensure the dryer is properly plugged in and the outlet is
delivering power.
● Inspect Door Closure: Confirm that the dryer door is fully closed. Dryers have
a safety mechanism that prevents them from running if the door is open.
● Examine Circuit Breakers: Sometimes, the solution is as simple as resetting
the circuit breaker connected to the dryer.
2. Inadequate Drying Performance
Symptoms:
● Clothes come out damp after a standard drying cycle.
Troubleshooting Steps:
● Verify Heat Settings: Make sure the dryer is set to the correct heat setting and
cycle. Incorrect settings can lead to poor drying performance.
● Clean Lint Filters: Blocked lint filters can restrict airflow, significantly
impacting drying efficiency.
● Check for Vent Blockages: Ensure that the dryer’s venting system is not
clogged as this can also restrict airflow and reduce drying capacity.
3. Overheating Issues
Symptoms:
● The dryer feels excessively hot during operation.
Troubleshooting Steps:
● Clear Lint Traps and Vents: Regular cleaning of lint traps and vents can
prevent overheating.
● Inspect the Thermostat: Faulty thermostats may cause the dryer to heat
beyond safe levels. Consider replacing the thermostat if it’s malfunctioning.
● Check for Overloading: Overloading the dryer can also lead to overheating.
Make sure to load the dryer according to its capacity.
4. Excessive Noise or Vibration
Symptoms:
● The dryer is louder than usual or vibrates excessively during operation.
Troubleshooting Steps:
● Level the Dryer: An unbalanced dryer can vibrate excessively. Adjust the legs
to ensure the dryer is perfectly level.
● Replace Worn Components: Worn belts or bearings can cause a lot of noise.
Inspect and replace them if necessary.
● Secure Loose Items: Sometimes, the noise may be due to loose items or
panels on the dryer. Tighten any loose components.
5. Dryer Stops Mid-Cycle
Symptoms:
● The dryer unexpectedly stops during a drying cycle.
Troubleshooting Steps:
● Check for Overheating: If the dryer has a built-in safety mechanism that shuts
it down when overheating, let it cool down before restarting.
● Evaluate the Load: Uneven or excessive loads can cause the dryer to halt.
Redistribute or reduce the load and try again.
● Inspect the Door Switch: A faulty door switch can interrupt operation. Test the
switch and replace it if needed.
Conclusion
Troubleshooting common issues with your commercial tumble dryer doesn’t always
require professional help. Simple checks and maintenance can resolve many
problems quickly and keep your operations running smoothly. However, for
persistent issues or complex repairs, professional service is recommended.
For expert maintenance tips or to schedule a service visit, check out Electrolux
Australia.